9908 Carburetor Tune-Up
Carburetor Cleaner active foam formulation is a high performance multipurpose solvent combination that removes all kinds of difficult-to-remove deposits from the carburetor inner and outer surfaces, throttle valves and injectors without disassembly. Effectively cleans all heavily soiled bare metal surfaces. Neutral towards PA66 plastic. Dissolves most plastics, rubber and car paint. This product is applicable to two- and four-stroke engines without oxygen sensor and catalyst.
Properties
- Excellent penetration Properties
- Evaporates quickly and residue free
- Dissolves resin and tar-type residues
- Removes oil and grease-based contaminants
- Dissolves paints, laquer, rubber, nylon and plastic parts
Application
- Multi-Purpose Cleaner for all heavily soiled metal surfaces
- Carburetor Cleaner can be used for a wide range of professional and DIY applications.
- Remove air cleaner and run engine at medium idle (about 750RPM) when applying product.
- Spray product into carburetor venturi (throat in carburetor’s air passage) until empty, striking automatic choke plate, main throttle plate, and shafts. This will result in a reduction to 400-500 RPM, this is normal.
- Turn off ignition and let the engine stand for 5-10 minutes.
- Restart engine, opening and closing throttle rapidly, for 2 minutes.
- Replace air filter.
- On older vehicles, a smooth-running carburetor is paramount in maintaining the right fuel-air mixture to keep your vehicle functioning properly. Regular inspection and cleaning is a great way to ensure this.
- Time between cleanings can vary depending on individual driving habits, but should be done about every time the oil is changed.
- The addition of fuel additives can help to keep the fuel system clean and the carburetor flowing effectively.
- Change your fuel filter on a regular basis to prevent debris from entering the carburetor.
Available in
400 ML – aerosol REF. 9993
400 ML – aerosol foam REF. 9908
650 ML – aerosol REF. 9938
